Prometheus Design Werx SPD Ti-SAK Scales GID - Fullered handle scales

설명

This SPD Edition features a best grade GID glow dot inlaid into the precision machined titanium billet replacement scales with fullers, Designed to retro fit the standard 91mm style "Swiss Army Knife". These high grade premium scales are press fit permanent replacements for the factory plastic scales. Fully contoured on a CNC these titanium scales will have the similar shaping and feel of the factory plastic scales, but made with titanium as a premium upgrade mod.

SAK scales also have the factory toothpick slot and tweezer slot. Matched billet titanium pocket clip uses the standard 3 screw pattern so the user can swap out the clip and personalize with other after market pocket clips such as the Dragontail pocket clips from Steel Flame and others, if so desired.

Please note that these are intended as a permanent replacement for the factory scales. These are precisely machined to match the brass ferrules of a 91mm SAK and will easily press fit into place with a vice or clamps and a piece of leather to pad the jaws. These G10-SAK replacement scales will require a little dab of a high quality epoxy or JB Weld when fitting. *Warning, when using other after market 3 hole pattern pocket clips, make sure you use the correct length machine screws so they are not so long where they will press out the flush fit G10 scale.

Modification of your 91mm type SAK with these scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx, INC is not to be held responsible for any damage to your SAK and the G10 scales during installation. Please check the video "Ti SAK Scales How to Install" from YT for step by step installation instructions.

SPECIFICATIONS:

Materials:
• 6AL-4V Titanium
• 316 Stainless Steel Machine Screws
• Strontium Aluminate
• G10

Approx. Dimensions:
• Height: 91mm
• Width: 18.03mm Tapers to 20.06mm
• Thickness: 3.9mm

Features:
• Fully Shaped and Contoured Titanium
• 5 Fullers on Presentation Side
• SPD Edition Best Grade Glow Dot
• Titanium Biller Pocket Clip
• Standard 3 Hole Pattern Allows for Other After Market Pocket Clips
• Slot for Factory Pen Accessory
• Slot for Factory Tweezers
• Slot for Factory Toothpick
• Slot for Factory Stick Pin
• SPD Kraken Trident Laser Mark

Approx. Weight:
• 1.46oz